Double the battery life of a smartphone by 100% free

Surely you are reading this post on PC or smart phone now. So I can say with certainty that you are a smart phone user. Well if you ask me which one is causing the most obstacles to smart phone usage? Under the eyes you will say that the smart phone is slow and the battery life of the smartphone is very low. Due to the low life of the charge, one always has to turn around with a power bank in the pocket or those who do not use a power bank like me, they use the smart phone outside for fear of ending the charge. I again save the charge by leaving the flight mood on the way to the distance. But this is not a solution in my opinion. How many importer call messages or online jobs are we missing out on in flight mode? Again, if the power bank charge is used on the phone, the battery also has problems. Even carrying this extra power bank is paramount. However, the reader must understand what I will talk about today. Today I will tell you a technique that I am going to tell you when I am 5% successful in the exam Double the battery life of smart phones for free. That is, if the phone runs for 5 hours with a 100% charge before, I will use at least 9 hours to use this technique. Do you feel happy now? Let's know the details.

How will the charge be doubly sustainable?

You surely think you're ready to ask me how the charge will double? Would you also say how to make your 2500mAmp battery 5000mAmp possible? Well, the reader has nothing to worry about. Let me just clarify that I didn't say when your 2500mAmp battery will be 5000mAmp. I'm saying the battery life of your battery will increase. How and why this life time will increase so?



At present all phones are made up of only one circuit board where all the small components (GPU, RAM, processor, etc.) are connected to one another in the series. The reason for this is that all the mobile maker companies aim to make the phones very light, slim production during this competition period. As a result, all the phones of the present time are being made on a single circuit board. The wires are lightly insulated to connect these components to make the lightweight and slim mobile. As a result, only the insulated wire is used on smart phones. But those of us who have studied science or who have studied engineering know that when electricity is transmitted through a wire, it moves around it by forming an electromagnetic field. That is, ∈ = NN. ΔΦ / .t

Because of this, the electric coating is provided with shock resistant coating as well as coarse coating so that these electromagnetic fields do not affect the surrounding device or dissipate the power by dispersing additional electromagnetic fields. But mobile phone makers do not adopt this policy to reduce and slim their weight. As a result, we charge 100% of our mobile phone battery, but we get the benefit of 50-60%. Charges are being wasted on smart phones because of shock insulation and insulation coating. I am talking about an easy way to understand if your phone is wasting power through the electromagnetic field. Does your phone get really hot when you're using it too much? Now, with this much use, you realize that a lot of electricity is flowing through the wire and more electricity is flowing through the current. At that moment, hold the mobile phone gently touching the body around the hairline. Did you understand anything The hair is going to stand? This is the electromagnetic field.

Since the loss of power loss is going to happen from the smart phone to the electromagnetic means, I will reduce the power loss by compressing this electromagnetic field in this post by giving an external quote and using it to the full advantage of the smart phone.

Materials:


  • White tape
  • Scissors
  • Tin foil
  • Measuring Scale
  • White offset paper
  • Mobile back cover

Step - 01. Made Base:

The inside of the back cover of your mobile should be marked with white offset paper. Cut the camera, flash, speaker part to make it look nice. Cut the inner part according to the size of the cover as given on the white paper.

Step - 02. Cut the tin foil:

The width of the base should be measured with a measuring scale / tape. The tin foil paper should be cut to the width of that base. Now the base size foil has to be cut in half inch. I got a half inch 8 piece. How many pieces you have will depend on the back cover base of your mobile. However, no matter what the piece is, just keep in mind that the pieces are half an inch wide and the length is equal to the width of the base. And the side of the camera is usually a small piece. You will adjust your size.

Step - 03. Place foil on foam:

Now the offset paper base has to be covered with foil paper. The foil paper should be laid in such a way that the foil paper surrounds the two sides of the back cover of the mobile. Now you have to enclose a piece of foil paper with white tape. And yes, remember one piece of foil paper doesn't touch another piece of foil paper. In this case, you will need to put white tape on the edge of the foil paper so that the half part of the tape is on the foil and the half on the foil. Then you can easily apply foil paper and it does not matter if you touch one with the other because the two foils will be separated by white tape.

Observe the results:

The above tasks are all set up and ready for you to use. Reverse the base and set the cover on the mobile. Now, without having to use it, go to your mobile settings and see the battery life for 100% of your battery life. This time, use the mobile for a while. Carefully place and charge the mobile on the mobile back cover now made by foil to reduce the charge. Once full charge, go to Settings again to see the charge's life time. Are you surprised? I'm surprised to see you see more life time than ever before. Base According to my description and if the base is mounted properly on the mobile back cover you will definitely get successful results. I tested it myself.


This was discussed in detail today. I do not know what you mean. Even if you like it, share it with your friend and let them know. Only then will our writing be successful. And we are encouraged to write a better article.

Thank you so much for reading the article discussing your valuable time. I hope that through this article you have learned, understood and learned a little bit. Still, if someone has difficulty understanding or informing us of any kind of problem then we can report it to us. We will try to solve your problem, InshaAllah

Today so far Again, you will be presented in front of any other technical article. Be well, stay healthy and stay in touch with the state. Thanks ...

No comments

If any problem, please comment us below the comment box.

Powered by Blogger.